Serving the Birmingham area  ·  (205) 946-3891  ·  Open Mon-Sun 7am-7pm
📞 (205) 946-3891 Free Quote

Metal Roofing in Trussville, AL (35173) · Local Professionals

Birmingham Metal Roofing · Fast response in Trussville and the Birmingham area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+310Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Trussville's mix of established neighborhoods off Chalkville Road and newer subdivisions along the Deerfoot Parkway corridor means one thing for roofs: heavy summer downpours find every weak seam and flashing gap. Whether you're in a brick ranch near the Trussville Sports Complex or a two-story home tucked into the woods off Highway 11, the right metal roof can handle what Alabama weather throws at it.

Homeowners in ZIP 35173 call Birmingham Metal Roofing because we know this area's specific challenges, from the steep, wooded lots that back up to the Cahaba River to the wind-driven rain that comes with spring storms. We're a Metal Roofing Alliance member and fully insured, and we've worked on everything from older homes near the historic downtown to new construction in Trussville's growing neighborhoods.

Metal Roofing in Trussville (35173)

Trussville sits in the Appalachian foothills, and that means wooded lots with oaks, hickories, and tall pines that drop debris and shade roofs, plus steep grades that can make access tricky. Many homes here are on sloped properties where drainage matters, and heavy rain can pool if gutters and flashing aren't right. We see a lot of 1990s to 2020s two-story brick homes stepping up the ridges, along with older farmhouses and lake cabins out toward the hills. The long, hot, humid summers and the occasional ice storm put metal roofs to the test, especially at the eaves where ice dams can form. Our team understands how to handle the tight access on some of these lots and how to work with the local building department to make sure everything is done right.

We've been serving Trussville and the surrounding Birmingham area for years, and we've seen just about every roofing challenge this city has to offer. From metal shingle installations that match the look of older homes to standing seam roofs that can handle the wind, we know what works here.

Our services in Trussville

How a Job Works in Trussville

Step 1: Give us a call at (205) 946-3891 or fill out our contact form. We'll schedule a free on-site assessment at your Trussville home, where we'll inspect your roof, discuss your options, and provide a detailed estimate. We'll also check for any local permit requirements and explain the process.

Step 2: Once you approve the estimate, we'll order materials and schedule the work. Our insured crews handle everything from tear-off to installation, and we're careful to protect your landscaping and keep the site safe. If your home is in an HOA or historic district, we'll help you get the necessary approvals before we start.

Step 3: After the work is done, we do a thorough cleanup, haul away all debris, and walk through the finished roof with you to make sure you're satisfied. We leave your property clean and your new metal roof ready to protect your home for decades.

Pricing for metal roofing in Trussville depends on the size of your roof, its complexity, the material you choose, and the condition of your existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you're considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement and re-fastening starts at $750. We also offer metal shingle roofing and stone-coated steel roofing starting at $9 per square foot, and copper and specialty metal roofing starting at $20 per square foot. For a free estimate tailored to your Trussville home, call us at (205) 946-3891.

✅ Metal Roofing Alliance Member, licensed and insured for work in Trussville and nearby areas.

My Trussville home is on a steep, wooded lot with lots of pine needles. What's the best metal roof for that?
For wooded lots with heavy debris, we often recommend standing seam metal roofing because it sheds debris well and has concealed fasteners that won't catch needles. Metal shingles are also a good option if you want a more traditional look. We'll assess your specific lot and tree cover during a free inspection.
A storm just knocked limbs onto my roof in Trussville. How fast can you respond for emergency repairs?
We prioritize storm damage calls in Trussville and the surrounding areas. Call us at (205) 946-3891, and we'll schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We'll tarp any active leaks and provide a detailed repair estimate.
What does a typical metal roof replacement cost for a 2,000-square-foot home in Trussville?
For a 2,000-square-foot home, a basic metal roof replacement might range from $12,000 to $20,000, depending on the material and roof complexity. Standing seam or specialty metals will be higher. We provide free estimates so you can get an accurate figure for your specific home.
Do I need a permit for a metal roof replacement in Trussville, and how do I get one?
Yes, roofing permits are typically required for a full replacement in Trussville. The best place to start is the City of Trussville website at https://jccal.org, where you can find contact information for the building department. We can also guide you through the permit process as part of our service.
My HOA has design guidelines for roofing. Can you help with approval for a metal roof in my Trussville neighborhood?
Absolutely. We work with many HOAs in Trussville and can provide material samples, color charts, and specifications to submit for approval. We'll coordinate with your HOA to ensure the chosen metal roof meets their guidelines before installation begins.
Are you fully insured for roofing work in Trussville?
Yes, Birmingham Metal Roofing is fully insured, carrying both general liability and workers' compensation insurance. We're happy to provide certificates of insurance upon request so you can have peace of mind.
How often should I have my metal roof inspected in Trussville's climate?
Given Trussville's hot, humid summers and occasional severe storms, we recommend an annual inspection, especially after major weather events. Check for loose fasteners, debris buildup, and signs of wear, particularly around flashing and seams. We offer free inspections to catch small issues before they become costly repairs.
Why choose us?

Trusted professionals in Birmingham

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Birmingham

All your work handled by qualified professionals in Birmingham

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

310+ Verified Client Reviews in Birmingham

⭐⭐⭐⭐⭐ 4.9/5 · 310 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Birmingham · Response within 24h · No commitment · ☎ (205) 946-3891

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Birmingham ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm