Serving the Birmingham area  ·  (205) 946-3891  ·  Open Mon-Sun 7am-7pm
📞 (205) 946-3891 Free Quote

Metal Roofing in Homewood, AL (35209) · Local Professionals

Birmingham Metal Roofing · Fast response in Homewood and the Birmingham area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+310Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Homewood's post-war brick ranches and bungalows are packed tight along streets like Oxmoor Road and Broadway, with mature oaks hanging over the roofs and gutters that have seen decades of Alabama heat. The lots are narrow, the driveways short, and the tree canopy heavy, which means a metal roof here has to be planned around access, shade, and drainage from the start.

Homeowners in 35209 call Birmingham Metal Roofing because we know how shingles bake and grow algae in this humidity, and we know the difference between a quick patch and a roof that will hold through the next round of Dixie Alley storms. We are based in Birmingham, fully insured, and a Metal Roofing Alliance Member, and we work throughout Homewood and the surrounding neighborhoods.

Metal Roofing in Homewood (35209)

Most Homewood roofs sit on tight residential lots where the house is close to the property line and the trees are taller than the ridge. Those oaks and pines drop limbs and fill the gutters, and the shade keeps the roof surface damp longer, which is exactly where algae and moss take hold on asphalt shingles. When we install metal, we plan the panel layout around the tree canopy and the low-slope sections over porches and additions, and we make sure the gutters and downspouts are sized for the volume of water that comes off a metal roof. The older ranches and bungalows often have settled or uneven framing, so we check the decking and fastening before we ever talk about panels.

Our team has worked on homes throughout Homewood, from the streets near Samford University to the blocks off Green Springs Highway, and we understand the local building department's inspection rhythm. We also handle the retrofit work that lets you go over existing shingles where code allows, which is common on these post-war homes with one layer of old asphalt.

Our services in Homewood

How a Job Works in Homewood

Step 1: You call (205) 946-3891 or request a free estimate online. We schedule a time to walk the roof with you, check the decking, flashing, and gutters, and talk through whether a repair, a retrofit, or a full replacement makes sense for your home. We give you a written scope and a clear price before any work starts.

Step 2: On install day, our insured crew protects your landscaping and driveway, stages materials on the street or in the driveway depending on the lot, and works around the tight access that is common in Homewood. If your home is in a historic district or under an HOA, we coordinate the paperwork and color approval before we order panels. We pull the required roofing permit and schedule the inspection with the city.

Step 3: We clean the site daily, magnet-sweep for nails, and do a final walkthrough with you to check the panels, flashing, and gutters. We do not leave until you have seen the finished work and we have answered every question.

Pricing in Homewood depends on the size and pitch of your roof, the condition of the decking, access around the lot, and how quickly you need the work done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a metal roof over shingles retrofit at $7. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Gutters for metal roofs start at $9 per linear foot. Every roof is different, so call (205) 946-3891 for a free estimate and a real number for your home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Homewood and nearby areas.

My Homewood ranch has a low-slope porch roof and big oaks overhead. Can you install metal without tearing off the old shingles?
Often yes. If your home has a single layer of asphalt shingles and the decking is sound, a metal roof over shingles retrofit can work and starts around $7 per square foot. We inspect the decking and flashing first, because the shade and tree debris common in Homewood can hide soft spots. If the decking is compromised, we recommend a full tear-off.
A storm just peeled back panels on my roof in Homewood. How fast can you get out?
We offer free storm and wind damage inspections and prioritize active leaks and lifted panels. Call (205) 946-3891 and we will schedule the soonest available visit, typically within a day or two depending on storm volume. We document the damage for your insurance claim and make temporary repairs if needed.
What does a typical metal roof repair cost in Homewood?
Most repairs start at $450 for leak fixes and small flashing work. Screw replacement and re-fastening starts at $750, and flashing, chimney, or skylight repair starts at $600. The final price depends on access, the number of penetrations, and whether the issue is isolated or widespread. We give you a written price before we start.
Do I need a permit for a metal roof in Homewood, and where do I check the rules?
Roofing permits are commonly required for a full replacement or re-roof, and the thresholds and inspection requirements vary by jurisdiction. We pull the permit and coordinate the inspection as part of the job. You can verify local requirements with the City of Homewood through the Jefferson County website at https://jccal.org, and we are happy to walk you through what applies to your address.
My neighbor's tree hangs over my roof in Homewood. What are my options before I install metal?
Alabama property law generally allows you to trim branches that cross your property line, but you should confirm with the city or a local attorney before cutting anything substantial. For the roof itself, we can plan panel layout and gutter placement around overhanging limbs, and we recommend trimming back branches to reduce debris and moss growth before the new roof goes on.
Are you insured for work at my Homewood property?
Yes. We are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance before work begins, and our crews are covered on your property.
What maintenance does a metal roof need in Homewood's heat and humidity?
Keep gutters and downspouts clear of oak and pine debris, especially in fall and after spring storms. Check fasteners and sealant around flashing every couple of years, and wash the roof periodically to prevent algae and mildew buildup in the shaded areas. A coating or painting every several years can extend the life of older panels, starting around $2.50 per square foot.
Why choose us?

Trusted professionals in Birmingham

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Birmingham

All your work handled by qualified professionals in Birmingham

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

310+ Verified Client Reviews in Birmingham

⭐⭐⭐⭐⭐ 4.9/5 · 310 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Birmingham · Response within 24h · No commitment · ☎ (205) 946-3891

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Birmingham ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm