Serving the Birmingham area  ·  (205) 946-3891  ·  Open Mon-Sun 7am-7pm
📞 (205) 946-3891 Free Quote

Metal Roofing in Gardendale, AL (35071) · Local Professionals

Birmingham Metal Roofing · Fast response in Gardendale and the Birmingham area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+310Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Gardendale sits just north of Birmingham along I-65, where the ridge lines and older neighborhoods like Gardendale proper and Mount Olive feel a world away from the city rush. Homes here range from mid-century brick ranches to newer two-story builds on wooded lots, many with steep driveways and mature pines that drop limbs in every spring storm. If your roof is showing its age, we can help you figure out whether a metal roof makes sense for your place.

Homeowners in the 35071 ZIP code call Birmingham Metal Roofing because we know how wind funnels through these neighborhoods and how hail and ice can work on older shingles. We are a Metal Roofing Alliance member, fully insured, and we treat every Gardendale property like it is our own.

Metal Roofing in Gardendale (35071)

Gardendale lots tend to be generous, but many sit on a slope or back up to stands of tall pines and oaks. That means access can be tight for a full tear-off, and drainage matters. We often find gutters that were sized for a shingle roof and need upgrading for metal. The ridge lines north of the city catch straight-line wind from spring and late-fall storms, and that wind loves to lift weak edges and fasteners. We see a lot of wind-lifted panels and failed fasteners on older metal roofs around Mount Olive and along the ridges off Highway 31. Our crews are trained to handle metal roof over shingles (retrofit) and storm and wind damage repair, and we document everything for insurance if you need it.

We have been serving Gardendale and the greater Birmingham area for years, from simple leak repairs to full standing seam installations. We know the local building department and what inspectors look for, and we can help you navigate permit requirements. If you are in a historic district or HOA, we can also help with design review so your new roof meets the rules.

Our services in Gardendale

How a Job Works in Gardendale

Step 1: You call us at (205) 946-3891 or request a free estimate online. We schedule an on-site assessment at your convenience, inspect your current roof, and talk through options and budget. We will give you a written estimate before any work begins.

Step 2: Once you approve, we pull the necessary permits (we will point you to the City of Gardendale website at https://jccal.org for local rules) and schedule your crew. On the day of work, we protect your landscaping, set up safe access, and keep you informed. If your property has a steep driveway or tight side yard, we plan for that ahead of time so there are no surprises.

Step 3: After installation, we clean up thoroughly, haul away all debris, and do a final walkthrough with you. We do not leave until you are satisfied and your property is clean.

Pricing for metal roofing in Gardendale depends on the size of your roof, the pitch, access, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal roof over shingles (retrofit) at $7. Repairs start at $450, and screw replacement and re-fastening start at $750. We also offer free estimates for storm and wind damage repair and metal roof inspections. Call (205) 946-3891 to get a precise quote for your home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Gardendale and nearby areas.

My house is on a wooded lot in Mount Olive with pine trees dropping limbs. Can you repair punctures and keep the roof looking uniform?
Yes. We handle fallen-limb punctures and can match panels or shingles closely. We will assess the damage, repair or replace the affected sections, and make sure the repair blends with the rest of the roof. We also offer preventive inspections to catch weak spots before they become leaks.
A storm just came through Gardendale and lifted some panels. How fast can you get out?
We prioritize storm and wind damage calls. Call us at (205) 946-3891 and we will schedule an inspection as soon as possible, often within a day or two depending on demand. We can tarp or secure the area if needed and provide a detailed estimate for repair.
What does a typical metal roof replacement cost in Gardendale?
Most homeowners in Gardendale spend between $9 and $12 per square foot for a replacement, depending on the material and complexity. A 2,000 square foot roof might range from $18,000 to $24,000. We provide free estimates so you can get an exact figure for your home.
Do I need a permit to replace my roof in Gardendale, and how do I get one?
Yes, roofing permits are commonly required for a full replacement or re-roof, and requirements vary. We recommend checking with the City of Gardendale through their official website for current rules. We can also handle the permitting process for you as part of our service.
My HOA has strict rules about roof color. Can you help with approval?
Absolutely. We work with many HOAs in the area and can provide color samples, product specifications, and documentation to help you get approval. We will coordinate with your HOA to ensure the installation meets their guidelines.
Are you insured for work on my Gardendale property?
Yes, we are fully insured with general liability and workers' compensation coverage. We are happy to provide certificates of insurance upon request so you can have peace of mind.
What maintenance does a metal roof need in Gardendale's climate?
We recommend an annual inspection, especially after storm season, to check fasteners, seals, and flashing. Cleaning gutters and removing debris from valleys helps prevent water damage. We offer maintenance plans and can advise on the best schedule for your roof.
Why choose us?

Trusted professionals in Birmingham

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Birmingham

All your work handled by qualified professionals in Birmingham

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

310+ Verified Client Reviews in Birmingham

⭐⭐⭐⭐⭐ 4.9/5 · 310 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Birmingham · Response within 24h · No commitment · ☎ (205) 946-3891

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Birmingham ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm