Serving the Birmingham area  ·  (205) 946-3891  ·  Open Mon-Sun 7am-7pm
📞 (205) 946-3891 Free Quote

Metal Roofing in Leeds, AL (35094) · Local Professionals

Birmingham Metal Roofing · Fast response in Leeds and the Birmingham area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+310Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Leeds is the kind of town where a metal roof just makes sense. Between the older mill houses near downtown, the brick ranches off Highway 11, and the working farms and barns out toward the Cahaba River, folks here want a roof that can take a hit from a spring hailstorm and still look good ten years later.

When your roof starts leaking at a fastener or you lose panels in a straight-line wind, you need someone who knows Leeds, not a call center in another state. Birmingham Metal Roofing is based just down the road, and we've worked on everything from historic bungalows near Leeds Memorial Park to equipment barns on the ridges above town. We're a Metal Roofing Alliance member and fully insured, and we give free estimates for homeowners in 35094.

Metal Roofing in Leeds (35094)

Leeds sits where Jefferson, St. Clair, and Shelby counties meet, and the terrain changes fast. You've got flat lots near the Leeds City Schools campus and steeper wooded parcels climbing toward Ruffner Mountain and the ridges off Ashville Road. That mix matters for roofing: steep lots mean staging a dumpster and materials on a driveway or a narrow shoulder, and we often need to hand-carry panels up a slope. The older homes near downtown and along 9th Street have smaller footprints but tighter setbacks, so we plan panel lengths and delivery carefully. Out in the farm country toward the Cahaba, barns and shops are usually wide, low-slope structures where ribbed panels and screw-down systems are the practical choice. And after every storm season, we see more homeowners asking about FORTIFIED metal roofs because the hail and wind here are no joke.

Our team has installed, repaired, and replaced metal roofs all over the Birmingham area, from Mountain Brook estates to working farms in Blount and St. Clair counties. In Leeds, that means we know the difference between a lake cabin roof that needs ice protection and a commercial shop roof that just needs durable panels.

Our services in Leeds

How a Job Works in Leeds

Step 1: You call (205) 946-3891 or request a free estimate online. We schedule an on-site assessment, usually within a few days. We'll walk the roof, check fasteners and flashing, and talk through what you're seeing, whether it's a leak near the chimney or wind-lifted panels after a storm. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the required roofing permit through the local building department (rules vary by jurisdiction, so we verify what Leeds requires for your address) and schedule the crew. On tight lots near downtown, we plan material drops for early morning to keep driveways clear. If your neighborhood has an HOA or you're in a historic district, we help coordinate color and panel profile approval before ordering. For barns and shops out in the hills, we bring equipment suited to uneven ground and long panel runs.

Step 3: Cleanup is part of the job. We magnet-sweep for nails, haul away old material, and do a final walkthrough with you. We don't leave until you've seen the finished roof and know how to reach us if anything comes up.

Pricing in Leeds depends on the roof, but here are honest ballpark starting points. Metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you're retrofitting over existing shingles, that starts at $7 per square foot, though code limits how many layers you can cover. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. For barns and shops, corrugated and ribbed panel roofing starts at $5.50 per square foot. The biggest cost factors are roof size, pitch and access, the condition of the deck and flashing, and how quickly you need us out. Call (205) 946-3891 for a free estimate on your specific roof.

✅ Metal Roofing Alliance Member, licensed and insured for work in Leeds and nearby areas.

My barn off Ashville Road has old corrugated panels that are rusting through. Can you replace just the roof without rebuilding the structure?
Yes, in most cases. We inspect the purlins and framing first. If the structure is sound, we can install new ribbed or corrugated panels over the existing framing, often with a synthetic underlayment. If there's rot or sagging, we'll tell you what needs repair before we roof.
A storm just peeled back panels on my house near Leeds Memorial Park. How fast can you get out?
We prioritize active leaks and storm damage. Call (205) 946-3891 and we'll schedule a free inspection, usually within a day or two, and often same-day for emergency leaks. We can tarp or secure the area temporarily if needed.
What does a typical metal roof replacement cost for a 1,500 square foot ranch in Leeds?
For a simple ranch, you're generally looking at starting prices around $9 per square foot for replacement, so roughly $13,500 and up depending on pitch, access, and whether we remove the old shingles. Standing seam runs more, starting at $10 per square foot. We give a firm written estimate after seeing the roof.
Do I need a permit to re-roof my house in Leeds, and who issues it?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds and fees vary by jurisdiction. We verify the requirements with the local building department for your address before starting. You can also check with the City of Leeds through the Jefferson County website at https://jccal.org for general information.
My neighbor's tree limbs hang over my roof, and I want to install a metal roof. What are the property line rules?
In Alabama, you generally have the right to trim branches that cross onto your property, but it's best to talk with your neighbor first and avoid damaging the tree. If your HOA has rules about roof color or profile, we can help you submit the paperwork. We don't handle legal disputes, but we can recommend a surveyor if the line is unclear.
Are you insured for work on my property in Leeds?
Yes. We carry general liability insurance and workers' compensation coverage for our crews. We're happy to provide a certificate of insurance before we start.
What maintenance does a metal roof need in Leeds to handle the summer heat and winter ice?
Check fasteners annually, especially after high winds, and clear debris from valleys and gutters. In areas prone to ice damming, we recommend snow guards or ice protection. A coating every 10 to 15 years can extend the life of painted panels. We offer inspections and maintenance plans.
Why choose us?

Trusted professionals in Birmingham

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Birmingham

All your work handled by qualified professionals in Birmingham

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

310+ Verified Client Reviews in Birmingham

⭐⭐⭐⭐⭐ 4.9/5 · 310 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Birmingham · Response within 24h · No commitment · ☎ (205) 946-3891

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Birmingham ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm