Serving the Birmingham area  ·  (205) 946-3891  ·  Open Mon-Sun 7am-7pm
📞 (205) 946-3891 Free Quote

Metal Roofing in Birmingham, AL (35203) · Local Professionals

Birmingham Metal Roofing · Fast response in Birmingham and the Birmingham area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+310Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Birmingham's roofscape is as varied as its hills, from the 1920s Craftsman bungalows of Highland Park to the brick ranches of Homewood and the new builds stepping up the ridges in Hoover. Metal roofing fits that mix well, and we've installed it on everything from Forest Park Tudors to lake cabins out in Blount County.

When your roof starts leaking after a spring storm or you're tired of replacing asphalt every dozen years, call Birmingham Metal Roofing at (205) 946-3891. We're based right here in 35203, we know how Red Mountain heat and Dixie Alley wind treat a roof, and we're a Metal Roofing Alliance member with fully insured crews.

Metal Roofing in Birmingham (35203)

Birmingham sits in the Appalachian foothills, and that means steep wooded lots, long hot humid summers, and spring and late-fall tornadoes that have left their mark from Fultondale to Center Point. A metal roof here has to handle hail, wind-lifted panels, and the occasional ice storm at the eaves. We see a lot of active leaks through failed fasteners and flashing gaps on older homes, and fallen-limb punctures after every big blow. The housing stock ranges from 1900s foursquares on the hills of Highland Park and Redmont Park to post-war brick ranches in Vestavia Hills and two-story brick homes in Trussville and Shelby County. Each one needs a different approach to ventilation, panel profile, and color, especially in historic districts where design review can restrict what you can install.

Our team has worked these neighborhoods for years. We handle standing seam, corrugated panels, stone-coated steel, and copper, and we know which profiles hold up best against our weather. We also understand local permitting. Roofing permits are commonly required for a full replacement or re-roof, and thresholds and fees vary by jurisdiction, so we always check with the local building department before we start. You can find contact information for city offices on Birmingham's official city site. If you're in a historic district or an HOA, we'll help you navigate the design review so there are no surprises.

Our services in Birmingham

How a Job Works in Birmingham

Step 1: You call us at (205) 946-3891 or request a free estimate online. We schedule an on-site assessment, inspect your roof and attic, and talk through options, whether that's a repair, a retrofit over existing shingles, or a full replacement. We'll also check for storm damage and document anything your insurance might cover.

Step 2: Once you approve the scope and price, we pull the required permits and schedule the work. On tight lots in Forest Park or steep driveways in Mountain Brook, we plan material delivery and staging carefully so we don't block neighbors or damage landscaping. Our insured crews handle everything from tear-off to flashing and gutter work, and we keep you posted on progress.

Step 3: When the job is done, we clean up thoroughly, haul away old materials, and walk the property with you. We make sure you're satisfied with the installation, the cleanup, and the final look before we call it complete.

Pricing for metal roofing in Birmingham depends on the material, the size and pitch of your roof, access, and the condition of the existing structure. As a ballpark, metal roof installation starts around $8 per square foot, standing seam from $10, and replacement from $9. If you're retrofitting over existing shingles, that starts at $7 per square foot, though code limits how many layers you can cover. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs run from $9 per linear foot. We give free estimates and explain exactly what drives the cost for your home. Call (205) 946-3891 to schedule yours.

✅ Metal Roofing Alliance Member, licensed and insured for work in Birmingham and nearby areas.

My Highland Park bungalow has its original 1920s roof framing. Can you install metal over it?
We can often retrofit metal over existing shingles if the framing and decking are sound and local code allows it. On older homes, we inspect the attic and structural members first. If the framing needs reinforcement, we'll tell you and recommend the right approach, whether that's a repair or a full tear-off.
A storm just took off some panels in Center Point. How fast can you get out?
We prioritize storm and wind damage calls. Call us at (205) 946-3891 and we'll schedule a free inspection as soon as possible, usually within a day or two depending on volume. We can tarp or secure the roof to prevent further damage and provide documentation for your insurance claim.
What does a typical metal roof replacement cost in Birmingham?
Most homeowners spend between $9 and $14 per square foot for a full replacement, depending on material and complexity. A 1,500-square-foot roof might run $13,500 to $21,000. Access, pitch, and whether you need new decking all affect the price. We give free, no-pressure estimates.
Do I need a permit to replace my roof in Birmingham?
Yes, roofing permits are commonly required for a full replacement or re-roof. Requirements vary by jurisdiction, so we always verify with the local building department before starting. We handle the permit application for you and make sure the work meets code.
My HOA requires a specific roof color. Can you help with approval?
We can. We'll provide product samples and specification sheets for your HOA or historic district review, and we'll coordinate with them directly if needed. Many neighborhoods in Birmingham have design guidelines, and we're used to working within them.
Are you insured for work on my property?
Yes, we are fully insured with general liability and workers' compensation coverage. We're happy to provide a certificate of insurance before we start.
What maintenance does a metal roof need in Birmingham's climate?
Check fasteners and seals annually, especially after storm season. Clear debris from valleys and gutters to prevent ice damming in winter. We offer inspection and maintenance plans to keep your roof in good shape.
Why choose us?

Trusted professionals in Birmingham

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Birmingham

All your work handled by qualified professionals in Birmingham

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

310+ Verified Client Reviews in Birmingham

⭐⭐⭐⭐⭐ 4.9/5 · 310 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Birmingham · Response within 24h · No commitment · ☎ (205) 946-3891

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Birmingham ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm