Serving the Birmingham area  ·  (205) 946-3891  ·  Open Mon-Sun 7am-7pm
📞 (205) 946-3891 Free Quote

Metal Roofing in Center Point, AL (35215) · Local Professionals

Birmingham Metal Roofing · Fast response in Center Point and the Birmingham area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+310Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Center Point is a working town where most of the housing went up between the 1950s and 1980s, brick ranches and split-levels on generous lots with pines and oaks that keep gutters full and shade roofs half the day. It sits just northeast of Birmingham off Highway 79, close enough to the old East Lake and Roebuck shopping corridors that folks here know every shortcut.

Homeowners in 35215 call Birmingham Metal Roofing because we have spent years on these streets, and we know what happens to a roof after a Dixie Alley storm rolls over Center Point. From the January 2012 tornado to the hail that comes with almost every spring front, we have seen the damage pattern before and we fix it without a sales pitch.

Metal Roofing in Center Point (35215)

Center Point lots are mostly flat to gently sloping, which sounds easy until you deal with the drainage. Water pools along fence lines and against slabs after a hard rain, and that is where we see rot at the bottom of fascia boards and rusted out gutter runs. The bigger issue is wind. This part of Jefferson County sits square in Dixie Alley, and the January 2012 tornado proved how quickly a shingle roof can peel. We install standing seam and corrugated panels with fasteners rated for the uplift we actually get here, and we pay attention to the roof-to-wall connections because that is what holds a roof down when the next storm comes through.

Our team has worked Center Point and the surrounding Birmingham neighborhoods long enough to know which houses have the original 1960s decking that needs a once-over before any retrofit, and which ones have been re-roofed twice already and cannot take another layer under code. We are a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and we treat every Center Point property like it is on our own street.

Our services in Center Point

How a Job Works in Center Point

Step one is a free on-site assessment. We come out, get on the roof if it is safe, and look at the decking, flashing, and fasteners. You get a written scope and a clear price before anything gets ordered. If it is a storm claim, we document the damage with photos and measurements so your adjuster has what they need.

Step two is the work itself. On Center Point's tighter residential streets, we stage materials in the driveway and keep the dumpster off the road where we can. If your house is in an HOA or a historic overlay, we help you get the panel profile and color approved before we order. Permits are commonly required for a full replacement, and thresholds and fees vary by jurisdiction, so we pull them and schedule inspections. If you want to know what the City of Center Point website says about local rules, we can point you there, but we handle the paperwork either way.

Step three is cleanup and a final walkthrough. We magnet the yard for nails, haul off every scrap, and walk the roof with you so you can see the seams, flashing, and fasteners before we call it done. We leave your property clean, and we do not disappear after the final invoice.

Pricing in Center Point is straightforward. Metal roof installation starts at $8 per square foot, standing seam at $10, and a full replacement at $9. If you want to go over existing shingles, the retrofit starts at $7 per square foot, but code limits how many layers you can cover, so we check that first. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight work at $600. Corrugated and ribbed panel roofing starts at $5.50 per square foot, metal shingle and stone-coated steel at $9, and copper or specialty metal at $20. Coating and painting starts at $2.50 per square foot, gutters at $9 per linear foot, and snow guards at $1,200. The main cost factors are roof size, pitch, access, decking condition, and how urgent the job is. Call (205) 946-3891 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Center Point and nearby areas.

My Center Point ranch has original 1960s decking. Can you install metal over it?
Sometimes, but we check first. Older decking in Center Point often has soft spots near chimneys and valleys, and metal will telegraph every dip. If the deck is sound and the existing shingle layers are within the code limit, a retrofit can work. If not, we recommend a tear-off and new decking so the panels sit flat and the fasteners hold.
How fast can you respond to storm damage in Center Point?
We prioritize active leaks and wind damage. Call (205) 946-3891 and we will schedule an inspection, usually within a day or two depending on how many calls are coming in after a storm. We tarp if needed, document the damage for your insurance, and give you a repair scope before we start.
What does a typical metal roof cost for a Center Point home?
Most Center Point homes fall in the 1,500 to 2,500 square foot roof range. At $8 to $10 per square foot for installation or standing seam, that puts most full jobs in the low five figures. Repairs start at $450. The exact number depends on pitch, access, decking, and whether we are tearing off or retrofitting.
Do I need a permit for a metal roof in Center Point?
A full replacement or re-roof commonly requires a permit, and inspection requirements vary by jurisdiction. We pull the permit and schedule the inspections as part of the job. For the specific rules that apply to your address, check with the local building department, and you can start at the City of Center Point website for general information.
What if my neighbor says my new metal roof crosses the property line?
We set the roof within the existing footprint, so a property line issue usually comes up with gutters or overhangs. Before work starts, we confirm the roofline and drainage direction. If your HOA has design rules, we help you submit the panel profile and color for approval so there are no surprises after installation.
Are you insured for work on my Center Point property?
Yes. We carry general liability and workers' compensation coverage. We can provide a certificate of insurance before we start, and we recommend every homeowner ask for one from any contractor working on their property.
What maintenance does a metal roof need in Center Point's climate?
Check fasteners and seals once a year, especially after spring storms. Clear pine straw and leaves from valleys and gutters, because Center Point's tall pines fill them fast. Look at flashing around chimneys and skylights. A coating every several years can extend the life of an older panel roof. We offer inspections if you want a professional set of eyes on it.
Why choose us?

Trusted professionals in Birmingham

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Birmingham

All your work handled by qualified professionals in Birmingham

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

310+ Verified Client Reviews in Birmingham

⭐⭐⭐⭐⭐ 4.9/5 · 310 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Birmingham · Response within 24h · No commitment · ☎ (205) 946-3891

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Birmingham ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm